Overview
Emissions and Stack digital handheld process calibrator can provide DC 24 V loop voltage, measure current at the same time, and perform the switch on and off measurements. It can perform quick operations from stepping and zero to full gear. It is suitable for on-site process loop verification, maintenance, and fault diagnosis.
Features
- Can simulate transformer
- On-off measurement
- Stepping operation
- Percentage display
- Low Battery Indicator
Technical Specifications
| Digits Display | 5 digits |
| DC voltage output (DCV) | 24 V ± (10%) |
| DC current output (DCA) | 0.1 mA to 22 mA ± (0.05% + 4 μA) |
| DC voltage measurement | ± 0.1 V to 28 V ± (0.02% + 2 mV) |
| DC current measurement | ± 0.001 mA to 20 mA ± (0.02% + 4 μA) |
| Accessory | Industrial test lead CF – 36 (probe with alligator clip), Manual |
| Power Supply | 9 V Battery (ANSI or NEDA 1604 A or IEC 6LR619 V Alkaline) |
| Elevation Limitation | Lower than 0.62 mi (1 km) |
| Working Environment | 32 °F to 155 °F (0 °C to 50 °C) |
| Storage Environment | 14 °F to 23 °F (-10 °C to -5 °C) |
| Dimensions | 7.87 in x 3.93 in x 1.57 in (200 mm x 100 mm x 40 mm) |
| Weight | 1.22 lb (550 g) |
Reviews
There are no reviews yet.