Emissions and Stack Handheld Flaw Detector

This Handheld Flaw Detector has a detection range of 19.7 in to 196.85 In, sound velocity of 39,370 in/s to 590,551.18 in/s and transmit pulse of 400 V

SKU: EMSSFD-265 Category:

Technical Specifications

Detection range 19.7e-2 in to 196.85 In(0.5 mm to 5000 mm)
Material sound velocity 39,370 in/s to 590,551.18 in/s(1000 m/s to 15000 m/s), continuously adjustable, common sound velocity for quick selection during coarse adjustment
Pulse shift 0.39 in to 78.74 in(-10.0 mm to 2000 mm)
Probe delay  0.0 μs to 199.9 μs
Transmit pulse  400 V negative sharp pulse
Damping  high, low
Working mode  single probe or double probe
Operating frequency range  0.5 to 22 MHz (-6 dB), divided into two frequency bands 0.5 MHz to 6 MHz / 3 MHz to 22 MHz
Repetition frequency  40 Hz / 250 Hz / 1000 Hz three gears optional
Gain adjustment 0 dB to 110 dB, divided into 0.0 dB/ 0.1 dB / 0.5 dB/ 1.0 dB/ 2.0 dB/ 6.0 dB step adjustment
Detection method  full wave / positive half wave / negative half wave / radio frequency
Alarm gate  A/B two-way gate, positive and negative logic and audible and visual alarm modes can be set
Measurement mode  leading edge or peak
Horizontal linearity error  ≤ 0.1%
Vertical linearity error  ≤ 3%
Detection sensitivity margin  ≥ 60 dB
Dynamic range  ≥ 46 dB
Far field resolution  ≥ 30 dB
Sampling rate  hardware sampling rate 400 MHz
Storage  460 groups of data can be stored
Playback  It has the function of continuous recording and playback of dynamic echo for flaw detection
Curved surface correction  automatic correction of defect position during surface flaw detection of inclined probe
Automatic gain  20% to 85%, step 5%
Menu language  English
Communication interface  A/B type USB interface, a total of two
Display screen  5.0 in (127 mm) high-brightness TFT color LCD screen, 800 pixels × 480 pixels
Working environment temperature  14 °F to 122 °F (-10 °C to 50 °C)
Battery specifications 11.1 V 3900 mAh lithium battery, sustainable power supply for more than 6 hr
Power supply AC: 100 V to 240 V, DC: 15 V / 4 A
Waterproof level IP 54
Whole machine weight about 2.2 lb (1.0 Kg) (including battery)

 

Reviews

There are no reviews yet.

Be the first to review “Emissions and Stack Handheld Flaw Detector”

Your email address will not be published. Required fields are marked *

Scroll to Top