Features
- Measurement display mode A-type display mode
- With linear suppression function, the suppression is 80% of the screen height
- Freeze and thaw functions with waveform and flaw detection parameters
- AVG curve is automatically generated, and two types of defects can be customized
- Probe automatic calibration function, with peak memory function, support wireless communication
- The position and width of the gate can be arbitrarily set on the screen, and the incoming wave alarm can be set
- It has two display modes of angle and K value, and has the playback function of stored graphics
- With 500 independent flaw detection channels, each channel can set a set of flaw detection parameters independently DAC curve is automatically generated, 10 points can be recorded, four additional adjustable offset curves
- It can be switched between single element probe, dual element probe and two flaw detection working modes
- With storage function, it can store 100 A-scan graphs, parameters and DAC curves
- With delete function, delete the specified content (represented by the storage group number) from the storage area
- With real-time power status indication function, sound path measurement, echo frequency analysis function.
Technical Specifications
| Scan range | 0 in to 236.22 in (0 mm to 6000 mm) steel section wave |
| Working frequency | 0.4 MHz to 20 MHz |
| Vertical linearity error | <= 3% |
| Horizontal linearity error | <= 0.1% |
| Gain | 110 dB |
| Sensitivity margin | > 62 dB (7.87 in (200 mm) deep, 2 flat holes in diameter) |
| Resolution | > 40 dB (5N20) |
| Dynamic range | > 32 dB |
| product parameters | 5.51 in x 1.97 in x 8.66 in (140 mm x 50 mm x 220 mm) |
Reviews
There are no reviews yet.