Overview
Emissions and Stack digital ultrasonic flaw detector is an advanced type, can quickly, easily and without damage, accurately detect, locate, evaluate and diagnose various defects inside the workpiece such as cracks, welds, pores, sand holes, inclusions, folding, etc.
Features
- Measurement display modes: +, -, full wave, RF
- Linear suppression (up to 80% screen height)
- Single/double crystal probe options
- Gate setting and alarms
- 500 independent detection channels
- Angle and K value display modes
- Automatic DAC curve generation (10 points)
- Automatic AVG curve with custom defects
- Probe calibration function Stores 100 sweep patterns and parameters
- Graphics playback from storage
- Content deletion by storage group
- Peak memory
- Freeze/thaw with sound path and echo analysis
- Real-time power status indication
- USB communication support
- Li-battery (10+ hours), low consumption
- Buzzer alarms
- Light, user-friendly design.
Technical Specifications
| Scan range | 0 in to 393.7 in (0 mm to 10000 mm)Adjusting step distance: 3.94e-2 in (1 mm) |
| Pulse shift | -7 ms to 9984 msAdjustment step: 1 (-7 ms to 9984 ms) |
| Probe zero point | 0.0 ms to 99.99 msAdjust the step: 0.01 ms |
| Material sound speed(m/s) | 39370 in/s to 590551.18 in/s (1000 m/s to 15000 m/s)Adjust the step: 1 |
| Working methods | Single probe (receive and send), dual probes (one for receiving one for sending) |
| Frequency Range | 0.5 MHz to 20 MHz |
| Gain adjustment | 0 dB to 120 dBAdjust the step: 0.2 dB, 1 dB, 2 dB, 4 dB, 6 dB, 8 dB ,10 dB, 20 dB, 50 dB |
| Linear inhibition | Screen height 0% to 80%, step size: 1% |
| Vertical linearity error | Vertical linear error, not more than 3% |
| Horizontal linear error | Within the scan range, not more than 0.2% |
| Flaw detection sensitivity margin | ≥ 62 dB |
| Dynamic Range | ≥ 32 dB |
| Alarm | Incoming wave alarm |
| Display screen | Display:High-brightness color 5.7 in (144.78 mm) display |
| A-Scan display area | Full screen or localA-Scan shows freeze and thaw A-Scan fills |
| Flaw detection channel | 300 |
| Data storage | 500 A-Scan graphics |
| PC communication interface standard | USB |
| Units of measurement | Mm |
| Power Adapter | enter 100 V to 240 V / 50 Hz to 60 HzOutput 9 V/ 1.5 A |
| Battery | Lithium (Li) Battery 5000 mAh |
| Working temperature | 14 °F to 122 °F (-10 °C to 50 °C) |
| Working humidity | 20% RH to 90% RH |
| Interface Type | BNC |
| Dimensions | 485.02 in x 308.65 in x 110.23 in(220 mm x 140 mm x 50 mm) |
| Weight | 2.2 lb (1.0 kg) |
