Overview
Emissions And Stack visual fault locators are applicable to testing all types of faults of power cables with 35 kV and lower voltage, test kV cables or wires with above double core (including coaxial), test open circuit and low resistance faults, calibrating length of cables or wires and transmission speed of electric wave in the cables.
Features
- SCM centralized control, with strong anti -interference ability
- Nickel hydrogen battery and charger
- The instrument can work under AC or DC
- Built in a micro printer can print test waveforms
- At the “sample” state, “pulse 1” “pulse 2” can be arbitrary switched
- With left and right displacement
- Extended compression test waveform function
- In order to clearly observe any inflection, point of the test waveform
- Communication with computer
- Continuously sampling
- Displaying the test waveform
- With storage function, can store a total of ten on-site test waveforms
- Not afraid of power down.
Technical Specifications
| Display | 5 in (12.7 cm) |
| Testing Method | Flashover Sampling, Low impulse method |
| Measure Distance | Max: 37.28 mi (60 km), Min: 590.5 in (15 m) |
| Pre-Locating Accuracy | Absolute: ±393.7 in (±10 m)Relative: ±39.37 in (±1 m) |
| Built in DC power | 2.6 V, 10.4 Ah, connected external AC 220 V 50 Hz power Supply |
| Signal frequency | 300 HZ,15 kHZ continuous, continue to square wave |
| Instrument power | To 220 V ±10% 50 Hz |
| Output power | ≥100 w |
| Volume | 3.34 in x 7.87 in x 10.23 in (85 mm x 200 mm x 260 mm) |
| Weight | 2.2 lb (1 kg) |
