Features
- 4-channel oscilloscope
- 8-channel logic analyzer
- 25 MHz Arb. waveform generator
- 7 in (2.54 cm) 64 K color Display
- USB host and device connectivity
- Ultra slim, handy and portable design
Technical Specification
| Bandwidth | 300 MHz |
| Real Sample Rate | 2 GSa/s |
| Memory Depth | 32 K |
| Timebase Range(s/div) | 2 ns/div to 40 s/div |
| Delay time Accuracy | 500 ps |
| Vertical Resolution | 8 bit |
| Volts/div Range | 2 mV/div to 5 V/div |
| Position Range | ±50 V (5 V/div), ± 40 V(2V/div to 500 mV/div),±2 V (200 mV/div to 50 mV/div) ± 400 mV (20 mV/div to 2 mV/div) |
| Rise Time | ≤ 1.2 ns |
| DC Gain Accuracy | ±3% for Normal or Average acquisition mode, 5 V/div to 10 mV/div;±4% for Normal or Average acquisition mode, 5 mV/div to 2 mV/div |
| Trigger Types | Edge, Video, Pulse, Slope, Over time, Alternative |
| Trigger Source | CH1, CH2, EXT, EXT/5, AC Line |
| Trigger Modes | Auto, Normal, Single |
| Trigger Sensitivity
(Edge Trigger Type) |
DC(CH1,CH2,CH3,CH4): 1 div from DC to 10 MHz; 1.5 div from 10 MHz to 100 MHz; 2 div from 100 MHz to Full;AC: Attenuates signals below 10 Hz ;
HF Reject: Attenuates signals above 80 kHz; LF Reject: Same as the DC-coupled limits for frequencies above 150 kHz; attenuates signals below 150 kHz |
| Trigger Level Range | CH1, CH2,(CH3, CH4): ±8 divisions from center of screen;EXT: ±1.2 V;
EXT/5:± 6 V |
| Trigger Level Accuracy | CH1, CH2,(CH3, CH4): 0.2 div × volts/div within ±4 divisions from center of screen;EXT: ±(6% of setting +40 mV);
EXT/5: ±(6% of setting +200 mV); |
| Holdoff Range | 100 ns to 10 s |
| Cursor Measurement | Manual: Voltage difference between cursors: ΔVTime difference between cursors: ΔT
Reciprocal of ΔT in Hertz (1/ΔT); Tracing: The voltage and time at a waveform point; |
| Math | +, -, *, /, FFT |
| Channels | 8 Channel |
| Max. Input Impedance | 200 K |
| Input Voltage Range | 0 V to 3 V |
| Logic Threshold Range | 0 V to 3 V |
| Max. Sample Rate | 1 GSa/s |
| Compatible Input | TTL, CMOS, ECL |
| Sample Depth | 32 K |
| Wave frequency | DC 25 MHz |
| DAC clock | 2 K Hz to 200 M Hz adjustable |
| Frequency Accury | 0.10 % |
| Waveform Length | 4 KSa |
| Vertical Resolution | 12 Bit |
| Frequency stabilization | <30 ppm |
| Amplitude | ±3.5 V Max |
| Output impedance | 50 Ω |
| Output current | 50 mA Ipeak=50 mA |
| System Bandwidth | 25 M |
| Wave distortion | -50 dBc (1 KHz), -40 dBc (10 KHz) |
| Frequency area | DC 50 M Hz |
| Input Amplitude | 400 mV pp to 18 V pp |
| Coupling | DC |
| Frequency precision | ± Time Base Error ±1 Count |
| input impedance | >100 KΩ |
| Pattern Generator | 12 Bit |
| Supply Voltage | 100 V AC to 120 V AC RMS (± 10 %),45 Hz to 440 Hz,CAT;120 V AC to 240 V AC RMS (± 10 %),45 Hz to 66 Hz,CAT |
| Power Consumption | <30 W |
| Fuse | 2 A, T rating, 250 V |
| Dimension | 12.32 in x 4.25 in x 5.59 in (313 mm x 108 mm x 142 mm) |
| Weight | 5.5 lb (2.5 kg) |
Reviews
There are no reviews yet.