Overview
Emissions And Stack color scope meter is accurate and versatile, this portable oscilloscope provides a fast-sampling rate of up to 5 GS/s, a 200 ps resolution, and deep memory of 10,000 samples per channel. Perform timing or amplitude-related measurements on three phases or three-axis control systems or compare multiple test points in a circuit under test.
Features
- Up to four independent floating isolated inputs, up to 1000 V
- Up to 5 GS/s real time sampling (depending on model and channels used)
- Deep memory: 10,000 points per trace waveform capture (scope mode)
- Up to seven hours with BP291 for prolonged field use
- Large, bright color display for easy viewing in any environment
- Convenient storage, historical data viewing, and PC transfer via USB/Wi-Fi
- Easy field battery swaps with a convenient access door.
- IP51 rating, dust and drip-proof
- Intelligent triggering on fast, slow, and complex signals
- Frequency spectrum using FFT-analysis
- Automatic capture and REPLAY of 100 screens
- 30,000 points per input for precise low-frequency signal analysis
- Paperless Recorder mode with deep memory for long-term trend plotting
- 5000 count DMM included in 2-channel models for versatility
Technical Specification
| Number of Channels | 4 |
| Bandwidth | 200 MHz |
| Rise Time | 1.7 ns |
| Channel Architecture | All inputs fully insulated from each other and from ground Inputs may be activated in any combination |
| Input Coupling | AC or DC, with ground level indicator |
| Input Sensitivity | With 10:1 probe, 20 mV to 1000 V or div With 100:1 probe, 200 mV to 10 kV or div Direct (1:1), 2 mV to 100 V or div |
| Bandwidth Limiter | 20 MHz and 10 kHz |
| Polarity | Normal, inverted, variable |
| Vertical Resolution | 8 bits |
| Accuracy at 4 s to 10 μs or div | 5 mV or div to 100 V or div, ± (1.5% + 6 counts) 2 mV or div, ± (1.5% + 10 counts) |
| Input impedance | 1 MΩ (±1%) or 15 pF (±2.25 pF) |
Reviews
There are no reviews yet.