Overview
Emissions And Stack arbitrary waveform function generator features a two-channel function or arbitrary waveform generator that adopts direct digital synthesis (DDS) technology for designing, enabling the generation of output signals that are accurate, stable, and have low distortion.
Features
- Two independent channels with phase synchronization capability
- Sampling rate: 160 MSa/s, 12-bit vertical resolution, 16 k storage depth
- Five basic waveforms and 32 arbitrary waveforms in-built
- Waveform storage: Supports 10 user-defined set of waveform editing
- Pulse wave output set in edge time
- Internal or external AM, FM and FSK modulation function
- Output of linear or logarithmic frequency sweep and burst waveform
- Frequency meter of high precision of 160 MHz
- RS232, USB Device, and USB Host interfaces with USB flash disk support
- Multi-functional arbitrary waveform editing software equipped
Technical Specifications
| Supply voltage | 200 V to 240 V, 45 Hz to 65 Hz |
| Power consumption | 40 W |
| Types | 3.5 in (8.89 cm) TFT LCD screen |
| Resolution | 480 × 320, 16 M color |
| Operation Temperatures | 50 °F to 104 °F (10 ℃ to 40 ℃) |
| Non-operation Temperatures | 14 °F to 140 °F (-10 ℃ to 60 ℃) |
| Humidity Range | Within the range of 32 °F to 104 °F (0 ℃ to 40 ℃), less than 90 % relative humidity |
| Interface | RS232, USB Host, USB Device |
| Protection | Short circuit protection, automatically disables the waveform output when overloading |
| Level | Level |
| Impedance | 50 Ω |
| Rise or fall time | Less than 25 ns |
| Maximum frequency | 25 MHz |
| Carrier wave | Sine, square, ramp, pulse and arbitrary waveforms (excluding DC) |
| Modulation frequency | 2 MHz to 20 KHz |
| Modulation depth | 0 % to 120 % |
| < 10 us (sweep frequency) | Greater than 100 ns, less than 500 ns (burst) |
| Reaction time | Less than 10 us (sweep frequency) |
| Signal range | 5 V AC + DC |
Reviews
There are no reviews yet.