Features
- Core to core and clad to clad alignment
- PAS technology
- Fiber core and clad display with high resolution
- X and Y view display or X or Y single display
- Auto check leaved end face
- 5.7 (14.47 cm) inch color LCD
- Software update via USB port
Technical Specifications
| Applicable Fibers | SM, MM, DS, NZDS |
| Fiber Diameter | Cladding diameter: 0.003 in to 0.005 in (80 μm to 150 μm); Coating diameter: 0.003 in to 0.03 in (100 μm to 1000 μm) |
| Fiber Count | Single |
| Fiber Cleaved Length | 0.47 in to 0.62 in (12 mm to 16 mm) (Coating diameter: 0.009 in (250 μm)) |
| Actual Average Splice Loss | 0.02 dB (SM), 0.01 dB (MM), 0.04 dB (DS), 0.04 dB (NZDS) |
| Typical Splicing Time | Typical 9 s (standard SM fiber) |
| Return Loss | Greater than 60 dB |
| Splicing Mode | Auto Calibrate Normal Special |
| Fiber Aligning Method | Meticulous, Core, Clad, Manual |
| Splicing Program | 53 (templet), 40 (user) |
| Tube Heating Program | 9 (templet), 24 (user) |
| Tube Typical Heating Time | Typical 30 s |
| Protection Sleeve Length | 1.57 in, 2.36 in (60 mm, 40 mm) |
| Storage Of Splice Result | 4000 results, 20 parameter per result |
| Fiber Image Magnification | 300 X (X or Y view),150 X (X and Y view) |
| Battery Capacity | Typical 400 cycles (splice or tube heat with inner Li-battery) |
| Monitor | 5.7 in (14.47 cm) color LCD monitor |
| Tension Test | 2 N |
| Electrode Life | 2500 |
| Terminal | USB |
| Power Supply | AC 100 V to 240 V with AC adapter Inner Li-battery (7800 mAH) DC 13.5 V |
| Operating Condition | 0 ft to 3.1 mi (0 m to 5000 m) above sea level, 14 °F to 122 °F (-10 ℃ to 50 ℃) Max wind velocity of 15 m/s |
| Dimension (Lx W X H) | 5.90 in × 5.90 in × 5.90 in (150 mm × 150 mm × 150 mm) |
| Weight | 5.62 lb (2.55 kg) excluding battery
6.72 lb (3.05 kg) including battery |
Reviews
There are no reviews yet.