Emissions And Stack Spectrum Analyzer

This Spectrum Analyser has extensive frequency range from 9 kHz to 1.5 GHz, frequency resolution of 1 Hz, and aging rate of less than 1 ppm per year.

SKU: EMSPELA-200 Category:

Features

  • Frequency Range: 9 kHz to 1.5 GHz
  • DANL (Displayed Average Noise Level): -160 dBm
  • Phase Noise: -80 dBc/Hz @1GHz, 10 kHz offset
  • Total Amplitude Accuracy: <0.7 dB
  • Resolution Bandwidth (RBW): 1 Hz minimum
  • EMI Pre-compliance: Optional kit, EMC test software
  • Tracking Generator: Optional, remotely upgradeable
  • Advanced Features: Waterfall plot, modulation analysis, audio demodulation
  • Pass or Fail Test: Standard on-site with alert function
  • Digital Intermediate Frequency Technology: All-digital IF
  • Interfaces: USB Host, USB Device, LAN, earphone, HDMI
  • Display: 9 in (22.86 cm) LCD, 1280×800 pixels

 

Technical Specifications

Frequency Range XSA805(TG): 9 kHz to 500 MHz XSA810(TG): 9 kHz to 1 GHz XSA815(TG): 9 kHz to 1.5 GHz
Frequency Resolution 1 Hz
Reference Frequency Aging Rate <1 ppm per year
Frequency Span Span Range: 0 Hz, 100 Hz to max frequency of the instrument Span Uncertainty: ±span or (sweep points 1)
SSB Phase Noise (fc = 500 MHz) 10 kHz: <-80 dBc/Hz100 kHz: <-100 dBc/Hz

1 MHz: <-115 dBc/Hz

Resolution Bandwidth (-3 dB) 1 Hz to 1 MHz, in 1-3-5-10 sequence
RBW Accuracy <5% typical
Video Bandwidth (-3 dB) 10 Hz to 1 MHz, in 1-3-5-10 sequence
Amplitude Measurement Range DANL to +10 dBm, 100 kHz to 10 MHz, Preamp Off DANL to +20 dBm, fc ≥ 10 MHz, Preamp Off
Reference Level -80 dBm to +30 dBm, 0.01 dB by step
Preamp 20 dB, nominal, 100 kHz to 1.5 GHz
Input Attenuator 0 dB to 40 dB, 1 dB by step
Display Average Noise Level Preamp Off: -95 dBm to -140 dBm (Typical) Preamp On: -135 dBm to -160 dBm (Typical)
Level Display Trace Detectors: positive-peak, negative-peak, normal, sample, RMS, voltage average, quasi-peak
Frequency Response (fc ≥100 kHz) Preamp Off: <0.7 dB Preamp On: <1.0 dB
Uncertainty <0.4 dB (fc = 50 MHz, peak detector, preamplifier off, attenuation = 10 dB)
Level Measurement Uncertainty <0.7 dB (95% confidence level, S/N >20 dB, RBW = VBW = 1 kHz, preamplifier off, attenuation = 10 dB)
Tracking Generator (Optional) Frequency Range XSA805(TG): 100 kHz to 500 MHz XSA810(TG): 100 kHz to 1 GHz XSA815(TG): 100 kHz to 1.5 GHz
Tracking Generator (Optional) Output Power Level Range -40 dBm to 0 dBm
Tracking Generator (Optional) Output Level Resolution 1 dB
Tracking Generator (Optional) Output Flatness (Relative to 50 MHz) ±3 dB
Tracking Generator Spurious Harmonic Spurious: -30 dBc (Tracking generator output power -10 dBm)Non-harmonic Spurious: -40 dBc (Tracking generator output power -10 dBm)
Tracking Generator to Input Terminal Isolation -60 dB (Tracking generator output power 0 dBm)
Interface USB Host, USB Device, LAN, earphone interface, HDMI
Display 9 in (22.86 cm) TFT LCD, 1280 x 800 pixels
Dimension 14.76 in x 7.25 in x 4.72 in (375 mm × 185 mm × 120 mm)
Weight Approx. 8.15 lb (3.7 kg) (main device)

Reviews

There are no reviews yet.

Be the first to review “Emissions And Stack Spectrum Analyzer”

Your email address will not be published. Required fields are marked *

Scroll to Top