Emissions And Stack Function Generators

This Function Generators has amplitude range of 50 mV to 5 V (50 Ω), frequency of 10 M, amplitude of 0.5 to 5 Vpp AC and power of AC 110 V to 240 V.

SKU: EMSFG-102 Category:

Features

  • Direct Digital Synthesis Technology
  • Crystal Oscillation Reference
  • High Accurate Time and Frequency
  • Count burst or single burst both can be selected
  • Multiple output channels and EXT
  • Trigger or Frequency Standard Input channels
  • Data Storage and Recall
  • Optional GPIB and USB interface

 

Technical Specifications

Pulse Single, Double, Logic Positive or Negative, Positive or Negative Polarly, Single or Double, Logic Positive or Negative Logic Positive or Negative
Edge Time ≤10 ns≤10 ns

8 ns or 1 ms

5 ns or 1 ms

Overshoot ≤ 10%≤ 10%

≤ 10%

≤ 10%

Time
Pulse Period 20 ns to 10000 s (frequency range: 0.1 MHz to 50 MHz)20 ns to 10000 s
Time Interval 5 ns to 10000 s8 ns to 9999.5 s
Resolution 5 ns (Low range), 10 μs (High range)0.1 ns (typical)
Interval Error ± (T×5×10-5 + 5 ns) (Low range), ± (T×5×10-5 + 10μ; s) (High range)± (T×5×10-5+5 ns)
Pattern Length:4095 bitsLength range:2 to 16383 bits

Format: NRZ

Format: NRZ, RZ

Rate:100 MHz to 50 MHz

Amplitude Range 50 mV to 10 V (High Z)50 mV to 5 V (50 Ω)
Offset Range 50 mV to 10 V (High Z)± (50 mV to 5 V) (50Ω)
Output Impedance 50 Ω
TTL
TTL or COMS Level Low Level≤ 0.3 V, High Level≥3.0 V (high impedance load)
Output Impedance 50 Ω
Burst
Burst Count 2 to 65000 cycles
Burst Mode Continuous, Single
EXT. STD Input
Frequency 10 M multiple
Amplitude 0.5 to 5 Vpp, AC coupling
Trigger
Trigger Mode Internal, External, Manual
Ext. Trigger Input Frequency: 1 Hz to 10 MHz (Square), Amplitude: 1 Vpp to 20 VppAmpl: TTL,

Pulse width:>100 ns,

Input Impedance ≥100 kΩInput Impedance: ≥1 kΩ
General Characteristics
Power AC 110 V to 240 V,50 or 60 Hz, <80 VA
Display VFD5.7 in (14.4 cm) TFT LCD

4.3 in (10.9 cm) TFT LCD

Optional Interface USB, GPIBRS232(Standard), GPIB

RS 232(Standard)

RS232(Standard), GPIB

Dimension 10 in x 4.05 in x 15.1 in (254 mm × 103 mm × 384 mm)12.9 in x 6.1 in x 11.8 in (330 mm × 155 mm × 300 mm)

17.7 in x 3.9 in x 18.7 in (450 mm × 100 mm × 475 mm)

`Weight Approx.6.61 lb (3 kg)Approx.9.2 lb (4.2 kg)

Approx.13.2 lb (6.0 kg)

 

Reviews

There are no reviews yet.

Be the first to review “Emissions And Stack Function Generators”

Your email address will not be published. Required fields are marked *

Scroll to Top