Technical Specifications
| LCR test | |Z|, |Y|, C, L, X, B, R, G, D, Q, |
| Test Frequency | 50 Hz, 60 Hz, 100 Hz, 120 Hz, 1 kHz, 10 kHz, 20 kHz, 40 kHz, 50 kHz, 100 kHz, a total of 10 |
| Basic Measurement Accuracy | 0.05 % (UC2856) 0.1 % (UC2856B) |
| Equivalent Circuit | in series and parallel |
| Mathematical Functions | absolute deviation, percentage deviation |
| Range | automatically, manually select the |
| Trigger Mode | internal, external, manual, bus |
| Average Number of Delay Time | 1 to 255, 60 s to 1 ms, step |
| Calibration Function | open / short / load |
| Test Terminal Configuration | Five |
| Display | reading, Delta, delta %, V / I (the measured voltage or current monitor) |
| Display | 5 resolutions, 4.3-inch LCD display |
| Test Signal Frequency | > 50 Hz |
| Output Impedance | 30 ohm, 100 ohm |
| Test Signal | normal: 0.1 V, 0.3 V, 1 Vaccuracy: 10 % |
| |Z|, R, X | 0.01m to 99.999 M |
| |Y|, G, B | 0.0001 S to 99.999 S |
| C | 0.0001 pF to 9.9999 F |
| L | 0.0001 H to 999.99 H |
| D | 0.0001 to 9.9999 |
| Q | 0.0001 to 99999 |
| Theta (DEG) | -179.99 degrees to 179.99 degrees |
| Theta (RAD) | -3.14159 to 3.14159 |
Reviews
There are no reviews yet.