Emissions And Stack Digital Bench Oscilloscope Logic Analyzer

Emissions And Stack digital bench oscilloscope logic analyzers are 4CH oscilloscopes, with 1CH Arbitary/function waveform generator, independent keys of oscilloscope and waveform generator which is easy to operate at the same time. 80 MHz to 250 MHz bandwidth, minimum measurement range 500 μV /div,1 GS/s sample rate,advanced digital trigger system, high trigger sensitivity, low trigger jitter.

SKU: EMSPELA-170 Category:

Overview

Emissions And Stack digital bench oscilloscope logic analyzers are 4CH oscilloscopes, with 1CH Arbitary/function waveform generator, independent keys of oscilloscope and waveform generator which is easy to operate at the same time. 80 MHz to 250 MHz bandwidth, minimum measurement range 500 μV /div,1 GS/s sample rate,advanced digital trigger system, high trigger sensitivity, low trigger jitter.

 

Features

  • 4CH oscilloscope + EXT + DVM + auto range function
  • 80 MHz to 250 MHz bandwidth, minimum range 500 μV /div,1GS/s sample rate
  • Over 32 types of auto measurement function
  • Advanced digital trigger system, high trigger sensitivity
  • Over 14 types of trigger function: edge, overtime, pulse, pattern, interval, etc
  • Integrated USB Host or Device, convenient to communicate with PC
  • Support U-stick storage or systerm update
  • Support a variety of SCPI remote control command

 

Technical Specification

Bandwidth 250 MHz
Sample Rate Range 1 GS/s
Waveform Interpolation (sin x)/x
Record Length Maximum 64 K samples per single-channel.Maximum 32 K samples per dual-channel (4 K, 32 K optional)
SEC/DIV Range 2ns/div to 100s/div1, 2, 5 sequence
Sample Rate andDelay Time Accuracy ±50 ppm
Low Frequency Response (-3db) ≤10 Hz at BNC
Rise Time at BNC, typical ≤1.4ns
DC Gain Accuracy ±3% for Normal or Average acquisition mode, 10 V/div to 10 mV/div±4% for Normal or Average acquisition mode, 5 mV/div to 500 μV/div

Note: Bandwidth reduced to 6 MHz when using a 1 X probe.

Acquisition Modes Normal, Peak Detect, Average and HR
Acquisition Rate, typical Up to 2000 waveforms per second per channel (Normal acquisition mode, no measurement)
Single Sequence Acquisition Stop TimeUpon single acquisition on all channels simultaneously

After N acquisitions on all channels simultaneously, N can be set to 4, 8, 16, 32, 64 or 128

Mode Auto, Normal
Level ±4 divisions from center of screen0 V to 3.3 V
Holdoff Range 20 ns to 10 s
Slope Rising, Falling
Condition (When) <, >,  ≠, =
Source CH1 to CH4
Time Range 8 ns to 10 ns
Resolution 8 ns
Polarity Positive, Negative
Condition (When) <, >,  ≠, =
Source CH1 to CH4
Time Range 8 ns to 10 ns
Resolution 8 ns
Baud Rate (Custom) 300 bit/s to 334000 bit/s
Baud Rate (Custom) 5 kbit/s to 1 Mbit/s
Data format Hex
Data Length 4, 8, 16, 24, 32
Dimension 12.52 in x 4.33 in x 5.91 in (318 mm x 110 mm x 150 mm) (L x W x H)
Weight 6.393 lb (2.9 kg)

Reviews

There are no reviews yet.

Be the first to review “Emissions And Stack Digital Bench Oscilloscope Logic Analyzer”

Your email address will not be published. Required fields are marked *

Scroll to Top