Overview:
Emissions And Stack Digital LCR Meter series is a low-end LCR digital meter with new technology, high performance and low price, which can read test results more intuitively. 50 Hz to 200 KHz multi-frequency and 0.1 % basic accuracy can meet the requirements of production line quality assurance, incoming inspection and laboratory measurement.
Features:
Technical specifications:
| Parameters | L, C, R, | Z|, D, Q, X, ESR, θ (Deg), θ (Rad) |
| Basic Accuracy | 0.1 % ± 5 dgt |
| Equivalent Circuit | Series, parallel |
| Math Function | Percent deviation |
| Range | Auto, Hold, Manual selection |
| Trigger Mode | INT, MAN, EXT, BUS |
| Test Speed (≥1 KHz) | Fast: 30 t or s, Medium: 10 t or s, Slow: 3 t or s |
| Times Average | 1 to 255 |
| Delay Time | 0 to 60 s, 1 m s step |
| Adjustment | Open or short or load |
| Test Terminal Configuration | 5 terminals |
| Signal Level | 0.1 VRMS, 0.3 VRMS, 1 VRMS |
| Display Mode | Direct, Δ, Δ %, V or I (Measured voltage or current monitoring) |
| Source Resistance | 30 Ω, 100 Ω |
| |Z|, R, X, ESR | 0.1 m Ω to 99.999 MΩ |
| C | 0.01 pF to 9999 u F |
| L | 0.01 µH to 9999 H |
| D | 0.0001 to 9.9999 |
| Q | 0.0001 to 9999.9 |
| q (Deg) | -179.99 to 179.99 |
| q (Rad) | -3.1416 to 3.1416 |
| Δ% | -999.99 % to 999.99 % |
| Storage | More than 100 sets of internal instrument settings for storage or recall, more than 500 sets of U disk expansion |
| Interface | RS232C, USB HOST, USBCDC, HANDLER, USBTMC, headphone jack, Optional: GPIB |
| Operating Requirement | Temperature: 32 °F to 104 °F (0 ℃ to 40 ℃); Humidity: 90 % RH |
| Power Supply | Voltage: 198 V to 242 V; Frequency: 47.5 Hz to 63 Hz, power consumption: ≤ 30 VA |
| Accessories | Kelvin Test clip; AC Power Cord |
| Optional | SMD patch test fixture; SMD patch test clip; Test fixture; Short-circuit slice |
| Size and Weight | 14.96 in x 4.01 in x 10.62 in (380 mm x 102 mm x 270 mm)7.93 lb (3.6 kg) |
Reviews
There are no reviews yet.