Overview
Emissions And Stack high-precision digital LCR meters are high-precision LCR meters with basic accuracy of 0.1% and 0.05% and a maximum measurement frequency of up to 500 kHz. The 5-digit 4.3 in (10.92 cm) TFT LCD display gives easy reading. The RS-232 interface facilitates remote control and analysis of measurement results. With its fast measurement speed, wide frequency range, and low cost, this product is widely used in R&D, IQC, online quality control, and automatic test systems.
Features
- 32-bit core processor
- 5-digit 4.3 in (10.92 cm) TFT LCD display
- 2 signal source output impedance: 30 Ω, 100 Ω
- 4 signal source output impedance
- List mode function, 10 steps
- 100 sets of memories for internal storage or save
- 500 memories for U disk storage or save, supports FAT16 and FAT32 files
- Save the last parameter settings before powering off
- Standard interface: RS-232, HANDLER, USB HOST
Technical Specifications
| Measurement function | |
| Test parameter | |Z|, |Y|, C, L, X, B, R, G, D, Q, θ |
| Equivalent circuit | Series, Parallel |
| Mathematical function | Absolute Deviation and Percentage Deviation |
| Range mode | Auto, Hold, Manual Selection |
| Trigger mode | Internal, Manual, External, BUS |
| Measurement speed | Fast: max. 30, Medium: 10, Slow: 3 (t/s) (greater than 1 kHz) |
| Average times | 1 to 255 |
| Delay time | 0 s to 60 s, step 1 ms |
| Calibration function | Open circuit, short circuit, Load |
| Measurement terminal | 5-terminal |
| Display mode | Direct, Δ, Δ% |
| Display | 5 digits 4.3 in (10.92 cm) LCD display |
| List Mode | 10 steps |
| Measurement signal | |
| Output impedance | 30 Ω, 100 Ω |
| Test level accuracy | 5% |
| Measurement display range | |
| |Z|, R, X | 0.01m Ω to 99.99 MΩ |
| |Y|, G, B | 0.0001µS to 99.99 S |
| C | 0.0001 pF to 9.99 F |
| L | 0.0001 µH to 999.99 H |
| D | 0.0001 to 9.99 |
| Q | 0.0001 to 9999.9 |
| θ (DEG) | -179.99º to 179.99º |
| θ (RAD) | -3.14 to 3.14 |
| Δ% | -999.99% to 999.99% |
| Comparator and interface | |
| Memory | 100 sets of memories for internal parameter settings storage or save500 sets for U disk parameter settings storage or save |
| General | |
| Operating environment | 32 °F to 104 °F (0 °C to 40 °C), less than 80% RH |
| Power source | 110 V or 220 V ±10%, 47 Hz to 63 Hz |
| Power consumption | Less than 30 VA |
| Accessories | 4-terminal Kelvin test clip leads, RS232 cable, power cord, operation manual |
| Dimensions (W x H x D) | 10.43 in x 3.94 in x 13.39 in (265 mm x 100 mm x 340 mm) |
| Weight | Approx 7.71 lb (3.5 kg) |
Reviews
There are no reviews yet.